Powered by Zen Cart :: The Art of E-Commerce


french  japanese  german  portugues  spanish  italian  russian  简体中文  English  
Languages:


Categories

high temperature & high capacity 9459156T 3.7V 10AH Rechargeable li polymer battery

high temperature & high capacity 9459156T 3.7V 10AH Rechargeable li polymer battery




Specification:
  • Model: EJ9459156T
  • Voltage(V):3.7
  • Capacity(Ah): 10
  • Type:Polymer lithium-ion battery (high temperature)
  • Standard Charge Current(A):0.2C5
  • Max Charge Current(A): 1.0C5
  • Charge cut-off Voltage(V): 4.2±0.05
  • Impedance(mΩ): ≤60
  • Pack Dimension(mm):9.4×60.0×161.0( Max. H*W*L)
  • Weight(g):195
 

 

 Features:

  • Light weight
  • High energy density.
  • Excellent storage performance and low self-discharge rate
  • No fire, No explosion, No leakage
  • Environmental-friendly
  • OEM and ODM are available upon request
 
Application: 
  • Airsoft Gun, Paintball Gun 
  • RC Model, RC Airplane, RE Car, RC Helicopter, RC Hobby 
  • Electric Instrument 
  • UPS Aero Model 
  • Military Use
 
Cautions of charge & discharge:
  • Charge:
Charging current should be lower than values that recommend below. Higher current and voltage charging may cause damage to cell electrical, mechanical, safety Performance and could lead heat generation or leakage. 
(1) Batteries charger should charging with constant current and constant voltage mode; 
(2) Charging current should be lower than (or equal to )1C5A; ;
(3) Temperature 0~45℃ is preferred when charging; 
(4) Charging voltage must be lower than 4.25V. 
  • discharge:
(1) Discharging current must be lower than (or equal to )2C5A;
(2) Temperature -10~70℃ is preferred when discharging; 
(3) Discharging voltage must not be lower than 2.75V.(Not including -10℃discharge )
  • Over-discharge:
It should be noted that the cell would be at an over-discharge state by its self-discharge. In order to prevent over-discharge, the cell shall be charged periodically to keeping voltage between 3.6-3.9V. Over-discharge may cause loss of cell Performance. It should be noted that the cell would not discharge till voltage lower than 2.5V.